Home > Windows 10 > Trouble Booting HP Hard Drive In A Gateway Computer

Trouble Booting HP Hard Drive In A Gateway Computer

Contents

How to use the G Suite Toolbox to debug common domain problems Are expensive cables worth the added cost? For more details of Active Partition, please see Accidentally Marked Drive C Active. The computer starts, but makes beeping sounds Beep sounds typically occur when a keyboard key is stuck, a memory DIMM or hard drive cable is not seated properly, or a component You don't try to fix windows update problems until you have run your dism/online check. http://wpquickadminthemes.com/windows-10/unable-to-do-system-or-hard-drive-backup-restore.html

Of course, there’s often a big gap between what should happen and what does happen.Let’s see if we can fix this problem.[Have a tech question? Also, you'll want to ground yourself by touching a un-painted metal object (I use a wrench) to ground myself before touching the insides of a computer. Step 1: Remove discs and devices before troubleshooting startup issues Turn off the computer, remove any discs and USB devices, then remove memory cards from the card reader slot. Stellar hard drive recovery services helped me out recovering the data. http://www.bleepingcomputer.com/forums/t/543233/trouble-booting-hp-hard-drive-in-a-gateway-computer/

Computer Not Powering On

Not to yank your chain as it were, just a friendly reminder that "new" stuff is not ALWAYS new. Reply Pritesh says: January 19, 2015 at 1:39 am My PC is very slow, getting tutter between many times, PC red light not blinking, It has two lights green and red. HighPoint delivers these features to all levels of RAID HBA regardless of desktop and Enterprise levels. Try to boot into Safe Mode with Networking.

Privacy Policy © Copyright 2017 HP Development Company, L.P. MiniTool Partition Wizard Bootable CD (freeware) can help do these operations. I also think perhaps removing and re-installing (physically, not software-wise) the hard drive resets things back to normal. Hp Computer Startup Problems The only problem is the cpu fan is not working and it does not boot up.

After I play with the power switch for awhile it comes on with the fans full speed and power still to the cd drive but it can't be opened. Windows 10 Not Booting Hp All Dell laptops work this way, I think. Report Rem- Jan 8, 2009 at 05:16 AM Hi, i was just wondering if I could ask a question. Disconnect the mouse and keyboard, then restart the computer.

Remember not to leave it ON for more than 5 secs. Windows 10 Not Booting Black Screen Report tinker- Jan 22, 2009 at 08:14 AM I have an old Gateway computer (2001) with a similar problem. Topic Starter Members 21 posts OFFLINE Gender:Male Local time:10:31 AM Posted 07 August 2014 - 02:49 PM Well, I'm not running windows 7 or 8.1 so it probably doesn't matter The 800MHZ cerelon processor ) had been damaged ,The motherboard (used for a 1yr 6 months) (second hand) works with 1000MHZ (UPGRADE) but wont accept another 800mhz processor (strange) .

Windows 10 Not Booting Hp

The power supply fan runs, the other fan runs too. Follow these steps to use the UEFI tests to check for problems: Step 1: Run the System Quick Test in UEFI (All-in-Ones) The System Quick Test takes about 10 minutes to Computer Not Powering On As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged Hp Laptop Wont Boot Past Hp Screen Now if you will excuse my absence I must be off to attend an askewed veil.

Report DJ AKSHAY 266Posts Sunday December 21, 2008Registration date April 26, 2010 Last seen - Jul 16, 2009 at 11:26 PM Normally you should use the eraser on the memory card http://wpquickadminthemes.com/windows-10/usb3-drive-not-recognized-by-windows-10.html Let you know how it goes. 09/21/2014 by Anthony Massey Ok so holding the F11 key on restart wasn't working. Yes No Voted Undo Score 0 Cancel Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz? PCMechHome Sign Up About PCMech Meet The Team Support PCMech Ask PCMech Write for PCMech Malware Removal Help Join [emailprotected] Team Community Forum Contact PCMech Network MammaTech Do It Yourself Build Hp Laptop Not Starting Up+black Screen

Cancel emanuelmuresan08 Rep: 1 Posted: 03/09/2016 Options Permalink History The way I fixed this problem ( to me it happened on windows 10) is that i used a bootable usb stick If you are capable of taking out hard disk and then connecting it correctly, please quit from BIOS and power off computer. After a half hour of warming up, restart the computer and the drive spun up and was readable. Check This Out Follow these steps to remove and reseat the memory modules in the computer: Turn off the computer and unplug all cables, except for power, then write down each cable location.

Thanks for sharing. Windows 10 Not Starting After Update So now run the dism/online number 2, then fix if necessary with Number 3, and then run your Windows update trouble shooter and you are now through. Yes No Voted Undo Score 0 Cancel Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz?

Reply siva prasad says: June 19, 2016 at 10:28 pm I have a Problem, my pc informs to me."your pc hard disk failure, backup your data".

I guess it's time to my computer tech. For you, it was not the result of the update, but in any case, you'll need to reinstall Windows. If either of them is disconnected or loose, the BIOS won’t see the drive, and the computer won’t be able to use it.What if the PC is truly bricked, and you Hp Laptop Wont Start Up Here are 6+ signs it might be…How to troubleshoot your optical driveMemory Failure: Warnings, troubleshooting and solutionsMotherboard Failure: Diagnosis and Solutions Comments May Hwang says: September 28, 2007 at 10:02 am

Try to reset the BIOS then try again. Was this answer helpful? Took out the memory sticks and no beeps. http://wpquickadminthemes.com/windows-10/updated-computer-using-samsung-sw-update-and-computer-became-unbelievably-slow.html Press and hold the power button for five seconds.

Was this answer helpful? WARNING SPINRITE 6 on a 10GB drive can take 8hrs on a Pentium 3 (havent needed it on a new system so i cant tell you if it would be faster My main gripe is all the save game progress. When I finished, I powered up the PC, all I am seeing now is the manufacturer's logo.

So I turned off and back on and this time it's reverted back to the frozen Motherboard page. Question is, with the Iomega, where it spins up a bit, clicks twice and spins down, starting the cycle again and again until I shut it off, is there a way